RM-2
Stereo Rack Monitors
Stereo powered monitor condensed into a space-saving 1U size. It can be used for a wide range of applications from sound checks on stage to equipment for in-store demonstrations, etc.
Features
Rack mountable in a space-saving 1U size (rack mount angle can be removed).
Equipped with a 10W+10W rated output power amplifier and two antimagnetic elliptic cone full-range speakers.
Analog input (XLR, +4dBu and PHONE, -10dBV combo type) and digital input (XLR, AES/EBU).
Headphone output. Speaker output is muted when headphones are used (plugged into the jack).
Equipped with a mute switch and channel select switch. The mute switch and channel select switch allow you to select the source according to the situation.
Highly visible high-luminance 26-dot LED meter (L/R). The LED meters are not only audible, but also visually visible.
Specifications
Main Specifications
| Speaker section | |
|---|---|
| Built-in Unit | 110 x 40mm cone type antimagnetic type |
| impedance | 8Ω |
| Output Sound Pressure Level | 84dB/W(1m) |
| frequency response | 200Hz to 20kHz |
| Power Amplifier Section | |
| Rated output | 10W or more (8Ω load, 1kHz) |
| residual noise | -60dBV or less (DIN AUDIO) |
| distortion rate | 0.5% or less |
| Digital input | Connector: XLR-3-31 type Format: IEC60958 (AES/EBU) Sampling frequency: 44.1kHz to 96kHz |
| analog input | Connector: XLR/φ6mm stereo phone (combo type) Rated input level: +4dBu (XLR) / -10dBV (phone) Input impedance: 10kΩ min. |
| PHONES | Connector: 6mm dia. stereo phone Applicable load impedance: 8 ohms or more Maximum output: 20mW+20mW (32Ω/1kHz) |
| general | |
| External dimensions | 430(W)×44(H)×260(D) mm |
| Mass of main unit | Approx. 3.5kg |
| power (button on TV, etc.) | AC100V 50/60Hz |
| Power consumption | 10W |